Elcometer 1540 Cross Cut Adhesion Tester
The Elcometer 1540 Adhesion Tester is a simple instrument for quickly determining the coating adhesion of a large variety of paints up to 2 mils thickness.
Made from steel, this cross hatch gauge has 11 tapered teeth with 1mm spacing. Two sets of lines are cut at right angels to obtain a pattern of 100 squares. Results are determined by the above table.
Made from steel, this cross hatch gauge has 11 tapered teeth with 1mm spacing. Two sets of lines are cut at right angels to obtain a pattern of 100 squares. Results are determined by the above table.
Equipment
Part#
Part Description
List Price
Part#K0001540M001
Part DescriptionElcometer 1540 Cross Cut Tester 1MM: Made from hardened steel, 11 tapered teeth with 1mm spacing. Two series of lines are cut at right angles to obtain a pattern of 100 squares.
List Price$171.00
Parts
Part#
Part Description
List Price
Part#K0001539M001
Part NameElcometer 99 ASTM D3359 Tape: (used with 107 kit)
List Price$50.00
Part#K0001539M002
Part NameIso Tape (2409) / 1 roll (used with the 107 kit)
List Price$32.00