IPM IP-02 Transfer Pump

IPM's 100 Series 2:1 is designed specifically for difficult to handle materials. The immersed lower pump, tie-tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture.

New Designs for:

Higher Viscosities
Ease of cleaning
Fluids with 245a agent
Low Ceiling Installations
Interchangeable pump lengths

New design innovations to simplify handling and application of polyurethane, polyurea, and other two component materials.

New design for cleanable tubes

Allows thorough cleaning of the pump fluid tubes
Both the IP-02 and OP series have easily cleanable fluid tubes
Feature allows for nearly an unlimited number of pump rebuilds

IP and OP Series Pumps now have high viscosity "B" resin capabilities

"B" resins with the newer 245fa blowing agent can have viscosities up to 2000cPs
OP and IP series pumps have increased suction capability by 69%
Pumps have the capability of pumping the new "B" resins without heat or pressurization
The new design nearly eliminates foaming of material
Outlet ports are now a standard 3/4" NPT

Features

Fully air operated
2 ball piston design provides uniform positive displacement
Extremely durable pump with long life packing
Specially designed piston seals do not come into contact with material pumped. Hence, very long life as it can handle highly problematic fluids like Isocyanates which crystallizes on piston rods upon contact with moisture in air and rupture seals.